MANUAL CARBIDE ROD CUTTING / PARTING OFF MACHINE CCM – M32
Applications
- Carbide rods / Hardened HSS rods to required length. The rod can be used for manufacturing of cutting tools such as Endmills, Drills, Reamers etc. (For carbide rod ~ diamond grinding wheel, For HSS rod ~ CBN grinding wheel)
- Excessive damaged end face of Endmill / Drill before resharpening.
- Male centers / brazed centers present at the ends after cylindrical grinding.
Highlights
- Manual cutting / parting off machine
- Round rods and rectangular carbide strips can be cut off
- Built in coolant system
- Long lever for effortless feeding
- Machine guard for operator’s safety
- Smooth cutting. No chip off.
Features
- Ergonomical design with clear view
- of cutting area
- Bigger dia. Grinding wheel
- Spacious working Area
- Bulit in ruler to set cutting length
- High flow Coolant pump.
- Provision for filter paper
- Easy to operate
- Smaller foot print of machine
Safety Features
- Door interlock with spindle and coolant ON.
- Localized wheel Guard.
- Hand safety design for rod clamping.
- Machine lamp (LED) – Illuminated work space.
- Supply phase sequence detection
Technical Specifications
- Machine operation : Manual (Hand Operated)
- Rod dia. Range : 3 to 32mm
- Rod OAL length : Upto 340mm
- Min / Max cutting length 2mm / 340mm
- Wheel Diameter 254mm (10”)
- Grinding Spindle Upto 3000 RPM , directly driven
- Work holding Screw driven top clamping
- Coolant tank capacity 60 L
- Coolant flow 40 LPM
- Machine Base Steel Fabricated structure
- Machine weight 300kg
- Machine Dimensions (WxDxH) 850 x 820 x 1600mm ( Door Closed)
- 850 x 820 x 2000mm ( Door Open)
- Connected Load 3 kVA
- Electric supply 415 V / 3 phase
